sickws698

iTrader: (2)

How many guys out there have a lowering kit while running td's with lt's?



Im thinking of buying the eibach pro kit but i dont wanna buy this and then not have enough ground clearance

MeentSS02

iTrader: (11)

I'm not lowered down to Pro-kit level, but I'm within a half inch of that much lowering on my ride. You can see my Kooks+duals in my FQuick link (sig). No problems here...

staringback05

iTrader: (8)

im pretty sure slp headers are the main headers that have clearance issues

orangeapeel

iTrader: (18)

They hit on non-lowered vehicles. Doesnt mean that they are crap though.

If you are worried about clearance get a 2.5" setup made.

staringback05

iTrader: (8)

^^^not in the least, i do think slp's are seriously over priced from what ive seen....thats just another reason why alot of people around here dont use them....

"slp: were good for floormats and lids"

orangeapeel

iTrader: (18)

Their Heads and Cam package is pretty stout too.

sickws698

iTrader: (2)

mine is 2.5 " ....the kit lowers my car 3/4- to 1 inch. That im thinkin of getting.

to low?


thanks, bump

jmm98LS1

iTrader: (28)

I've got a pro-kit on my car along with 2.5" duals. The lowest part of the exhaust is right under the mufflers (~3" ground clearance).

Reject

iTrader: (24)

i have 2.5 inch and am going to be getting LT PS's in about next week. i'm dropped all over with eibach springs, i'm also saggin in the rear (well the car i mean) so i'll be doing it with tubs over axle too, i'll get you pix when i have it finished to get you a good visiual

02TransAm/Batmobile

iTrader: (32)

i wouldn't go with the eibach's, . . they are too, (i don't wanna say it but) ricey low, . . DMS, Hotchkis, or Strano would look better, . .

SLP headers hang really low, . and i heard the best tucked LT's are the XS Ebay ones . .

Good luck bro

Reject

iTrader: (24)

nah the eibachs arnt ricey, ricey is when the springs are cut and then the car bounceys when you sneeze on it. but i agree on getting the Strano one's those are the ones i'll be getting once i can make enough room in my hole of debt to buy them. the ebay headers have that little problem with the driver side being TOO well tucked up where you have to get an S pipe made to make it work. but i'd live with that knowing i have stainless steal headers that will turn that pretty purple brown color in a few months BTW that dude hasnt answered none of my emails (wich i knew he wouldnt) and he dosnt sell any more on ebay, not ls1's anyways.

NoGamesLS1

iTrader: (16)

I have a sportline kit and lts with 3" true duals. Needless to say I scrape my **** everywhere I go