plug wire question HELP :(
02-17-2007, 04:09 PM
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: Galveston, TX
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
plug wire question HELP :( I'm doing the coilpack relocation and having a hard time.
The wire ends that go to the coilpacks dont look like my stock ones and dont grasp onto the copper in the coilpack.
Is the coilpack end of a wire the same as the end that would go into a distributor? Can I interchange the two?
The wire ends that go to the coilpacks dont look like my stock ones and dont grasp onto the copper in the coilpack.
Is the coilpack end of a wire the same as the end that would go into a distributor? Can I interchange the two?
02-17-2007, 05:20 PM
#2
The coil pack end is the same as goes onto an LT1 opti-spark. Universal wires will work (all spark plug tips are the same), but the coil pack connector end is special. You need a set of wires, and the "Taylor Opti-Spark End Terminal Kit", which can be found here...
http://thunderracing.com/catalog/?ac...vid=3&pcid=104
http://thunderracing.com/catalog/?ac...vid=3&pcid=104