pacesetter headers/y question
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2006
Location: south jersey
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
pacesetter headers/y question
going to order tsp pacesetter headers and catted y- what do i need for full install? also, thiniking about getting dual electric cut outs...and recoommended mounting spots? before or after cats?
#2
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2006
Location: south jersey
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
also how long can i go with out tune...im getting a cam shortly after and would like to wait for a tune till then. will running headers and no tune do anything negative besides mileage and the ses light?
#3
10 Second Club
iTrader: (18)
Re-use the stock metal gaskets or get new GM metal ones.
Re-use the stock header bolts, just clean them with a wire brush and apply anti-seize to the threads.
Before I went true-duals I had my electric cutout in the I-pipe right before it goes over the axle.
You can drive with the headers with the stock tune without any problems. The SES light will be on but it won't affect anything at all. My car was rich on the stock tune..12.1 a/f at WOT. After full exhaust it leaned out to 12.5.
Re-use the stock header bolts, just clean them with a wire brush and apply anti-seize to the threads.
Before I went true-duals I had my electric cutout in the I-pipe right before it goes over the axle.
You can drive with the headers with the stock tune without any problems. The SES light will be on but it won't affect anything at all. My car was rich on the stock tune..12.1 a/f at WOT. After full exhaust it leaned out to 12.5.