Playing w/ my exhaust setup.
05-28-2007, 08:23 PM
#1
TECH Regular
Thread Starter
iTrader: (8)
Join Date: Jul 2006
Location: Costa Mesa, CA
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Playing w/ my exhaust setup. So i have LT's w/ a custom H-ipipe and dynomax bullets dumped. TR230 is going in the car once it arrives and the noise was annoying before. HOw much could I possibly lose by bringing the duals into one 3" pipe over the rear into the magnaflow catback muffler then obviously back into two pipes.
I already have the tips I want to use and the magnaflow catback. Should I just go ahead and do it and now worry about anything else, could I really lose that much power/tone? Should I bother with a cutout or two even?
The current setup is just too loud (drone is really the problem) and I know I want the pipes out to the back.
I already have the tips I want to use and the magnaflow catback. Should I just go ahead and do it and now worry about anything else, could I really lose that much power/tone? Should I bother with a cutout or two even?
The current setup is just too loud (drone is really the problem) and I know I want the pipes out to the back.
05-29-2007, 11:07 AM
#3
TECH Regular
Thread Starter
iTrader: (8)
Join Date: Jul 2006
Location: Costa Mesa, CA
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Yeah thats what I was figuring, I'm just afraid of losing that sweet sweet true duals sound. I just don't want all that rasp. Well I guesse I'll see how it goes.
Plus suposedly this TR230 has one wicked Idle
don't want to lose that.
Plus suposedly this TR230 has one wicked Idle
don't want to lose that. 
