Demon Of Dreams

iTrader: (3)

are they all built the same, be they GMMG, Hooker, Corsa, Dynomax, or whathaveyou ... all 3", but just curious to know the differences, honestly not too fond of hacking up my current one unless I know I can replace it easilly if need be

Tainted

iTrader: (9)

they are all the same except for maybe the slightest difference in a bend. all should flow the same though.

Demon Of Dreams

iTrader: (3)

all i need to know... let the hacking to pieces begin

kenp

iTrader: (9)

The DynoMax/Walker is a true 3", no reduction at the Y pipe. I tried to mix and match a SLP I pipe with a Dynomax over the axle and they were too different to screw with. I ended up buying the DynoMax I pipe and eliminated the standard reduction to 2 3/4" at the Y pipe. The Dynomax is not stainless.

Demon Of Dreams

iTrader: (3)

got a part # for that dynomax? I don't care if it's stainless or not, it'll be cut up anyway, since the other parts aren't stainless either, it doesn't bother me much and I can just keep my nice shiny stainless intermediate in good condition

kenp

iTrader: (9)

Walker 54064 is the I pipe & 53061 is the pipe over the axle to the muffler. Dynomax is Walker. The two were around $100 delivered.