edelbrock or GMPP carb intake
#1
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Jul 2004
Location: College Station/Pasadena
Posts: 8,182
Likes: 0
Received 0 Likes
on
0 Posts
edelbrock or GMPP carb intake
which one have you guys had experience with?
this is for a boosted set up.
also i read that you cant use any other rail on the edelbrock intake is this true? can i use speed inc rails on the GMPP intake?
this is for a boosted set up.
also i read that you cant use any other rail on the edelbrock intake is this true? can i use speed inc rails on the GMPP intake?
#2
TECH Fanatic
iTrader: (5)
Join Date: Sep 2004
Location: Mustang, Ok
Posts: 1,332
Likes: 0
Received 0 Likes
on
0 Posts
I dont know this for a fact but I think the GMPP will out flo the Edelbrock slightly. Its also shorter and doesnt require chopping up the cowl for clearance.
Someone correct me if im wrong.
Someone correct me if im wrong.
#3
TECH Enthusiast
iTrader: (5)
Join Date: Dec 2005
Location: Strawberry Point, IA
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
I believe that is correct. The advantage of running the Vic Jr is, you dont have to have the intake machined for the injectors (GMPP does not have the holes drilled) And with the price of intake rails and brakets just over $400, its hard to justify spending more money and going though more work. IMO the GMPP intake doesnt offer that much power over the Vic Jr.
Ron
#5
TECH Enthusiast
iTrader: (23)
Join Date: Apr 2005
Location: Lebanon, OH
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
I have the Edelbrock Victor Jr. along with Aarons elbow and didn't have to cut anything. Very slight rubbing on the hood. A 2lb sledge or cutoff wheel will take care of that. From the reseach I did awhile back their rails are good to 1400hp. Do you really need anything more?
#6
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Jul 2004
Location: College Station/Pasadena
Posts: 8,182
Likes: 0
Received 0 Likes
on
0 Posts
I have the Edelbrock Victor Jr. along with Aarons elbow and didn't have to cut anything. Very slight rubbing on the hood. A 2lb sledge or cutoff wheel will take care of that. From the reseach I did awhile back their rails are good to 1400hp. Do you really need anything more?