Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Ses

Thread Tools
 
Search this Thread
 
Old 12-13-2007, 12:57 PM
  #1  
Formerly darynC-10/23/10
Thread Starter
iTrader: (19)
 
Daryn's Avatar
 
Join Date: Aug 2006
Location: gonzales louisiana
Posts: 2,301
Likes: 0
Received 0 Likes on 0 Posts

Default Ses

ok so i recently had the SES light come on... so what. it always comes on now since the mods.... but i cranked er up this morning and started goin down the road and noticed it was down on power.. i was running on 7 cylnders.. so i turned around to go back to the house and i felt the moter trying to pick up the 8th one.. like it would go on and off ...

so itook my spark plug wire off and put it back on tightly and it cleard it up... but now you can hear it while at idle and when i rev it , when comming down from 3k rpms or so . it wil stay at 1300 for a few seconds .. then go down to 900.... also the header reads 224 degrees unlike the other .270+

any opinions?... im goin to start with changing my sparkplug and go from there




All times are GMT -5. The time now is 11:47 AM.