RiskyZ28

iTrader: (7)

i searched but the only thing i could find were about 13 pages of them selling their 243 heads.. i know they cant be flowing 305cfm like they advertise are they? anyone have any experiance with their heads? any feedback?

ls1pwrdss

iTrader: (74)

dan millian is the man hes a pro 5.0 racer so he is on his game and yes his heads flow what they say they do

RiskyZ28

iTrader: (7)

how are their heads flowing better than any other stage 1 or 2 head out there? i would think these would be a hotter item than afr heads. thats why im in here asking about the heads

04gtod

iTrader: (3)

I run Livernois LS6 Stage 2 heads. I have not have them flowed but went 11.90@115 with a 224 cam in a 3750 lb GTO. Best cam only was 12.25. Also over 400 rwhp.

LivernoisMotorsports

iTrader: (1)

Our bench is known to be somewhat conservative compared to others and we would rather underrate our heads slighlty than claim they flow better than they really do.

Please see the following thread titled "how many people on here have actually had their heads flowbenched? ": Click here

Particularly this post by cdubbzz:

My Livernois Stage III 243's flowed =/better than advertised

lift....in/exh
.200 138 111.2
.300 212 144.1
.400 262 184.2
.500 306.6 202.6
.600 330.2 217.7
.650 325 don't have exhaust
__________________
Bammann Racing Engines 395ci

My personal car, a 99 C5 convertible had our stage 1 CNC LS6 Heads and Cam, LG Motorsports Pro Long Tube Headers and Offroad X-Pipe, and factory Z06 TI Catback and ran a best of 12.3@119 mph on stock tires.

If you have any questions, feel free to call us at 313-561-5500 or pm me.

Thank you

Regards,

Rick LeBlanc
Livernois Motorsports

RiskyZ28

iTrader: (7)

thanks for the info. i hope you werent offended by my post, but im in the market for heads and if yours flow the numbers you advertise then i cant see why others would buy other heads. yours show the best numbers i have seen on a stage 1 and stage 2 port job at the lowest prices i have seen. so i wanted feedback from others that have your heads.... thanks for the link. ill be reading it in a few minutes

radz282003

iTrader: (1)

Their articles and tests in GMHTP have shown great products.

02 wife

I'm getting a set of Livernois ls6 stage 2 heads installed soon i'll let you know my results!

cdubbzz

iTrader: (11)

As you can see from above my heads were independantly tested and performed as expected. Before breaking my entire driveline at a track rental I did manage to run 124.3mph on my ONLY pass (granny shifting). Car put down 458/461 to the wheels through 3" steel driveshaft & Moser 12 bolt.
The car is a torque monster with 450lbs @ 3200rpm and climbs from there.

LivernoisMotorsports

iTrader: (1)

No offense taken. I understand that this is a large purchase and you want to make sure you're getting the best product for your money. We put a lot of time into R&D, flow bench testing, and engine/chassis dyno testing. We take pride in everything we do and wouldn't want to jeopardize our reputation by advertising false numbers. Thank you for your interest and everyone else for the kind words on our products.

Regards,

Rick LeBlanc
Livernois Motorsports

lastcall190

iTrader: (36)

I have been eying these up for about a year (school took up too much $$ now I have some spare coin forming...), and while I don't see many people running them, I found a few guys here and on vette forum that have been thrilled with the quality and performance of the work. I will probably go with these (Rick was very responsive and helpful when it came to asking questions and providing flow sheets). cgilles86 I believe is his name has the Stg2 heads/cam package if you wanna PM him and see what he thinks of his parts.

-J

1bad lad

livernois has the best heads for the money.......i know of a 6.0 vette stock short with livernois stage 3 heads not their 3r's that made 650rwhp with only 10 pounds of boost through an automatic and stock mufflers and a small 220's cam thats impressive blower was a d1sc

Dan Millen

Hey thanks I appreciate the nice comments!!


No not to worry we are not offended, we actually look forward to people comparing our heads to others. I don't think (I am a littlte biased) there is a better head for the money!

slonomo

iTrader: (8)

Looks like I'm going to get a real run for my money next year!

JDP

iTrader: (21)

no there heads suck, i have a set of there L92s on my 402, it only make 505 at the wheels with a stock L76 intake, stock 78mm Maf, only 1 3/4" headers


Livernois is great to deal with, i promise you that you wont be dissapointed, because i know i wasnt. ill be taking the car back to dan for a retune with different injectors, and a few more mods

02 wife

I'm thinking about doing a cam too! I'll have a long way to go to catch you!