Post Your Pics Of Your PCV *NON LS6 VALLEY PLATE* W/ Catch Can
#1
Post Your Pics Of Your PCV *NON LS6 VALLEY PLATE* W/ Catch Can
When i did my catch can, i did not like how my PCV looked. and today i finally took the tubing that goes from the plastic tube on the valve cover to the back of the PCV and that is all enclosed in another tube. Now i need to some how get my PCV back inline with everything. I ordered a catch can from WS6 store.
So please post you pics of your PCV with a catch can. I need to get this fixed. Obviosuly my car is not my DD so i need to get ideas on how to fix this.
Also what size screws do you use to mount the catch can to the head?
thanks
So please post you pics of your PCV with a catch can. I need to get this fixed. Obviosuly my car is not my DD so i need to get ideas on how to fix this.
Also what size screws do you use to mount the catch can to the head?
thanks
#2
Banned
iTrader: (10)
The bolt needs to be a short 6-8mm I think...the cyl head has a few already tapped holes not used that are easy to use.
Here is a good diagram of the proper operation of the PCV valve:
And the RevX can now has an integrated PCV valve in it for a nice clean install:
If you need more detailed help feel fre to ask, just let me know the inlet & outlet locations of the can you will be using.