tacklebox

iTrader: (10)

I purchased a used FAST intake and it included everything but the M8 x 30 button head valley plate bolts. Can they be substituted with anything or do i have to spend more money for the ones from FAST?
I have some hex head M8 x 30 bolts, and the height of the head is only about half as tall as the stock ones. Would these be ok to use?

themack56

iTrader: (70)

just get the fast bolts, save urself hassle

studderin

iTrader: (28)

the "fast" bolts are just a normal button head cap screw, you can get them local at a fastener/hardwear store

Jantzer98SS

iTrader: (54)

Yes just get normal button head bolts. Might as well get stainless. You should be able to get them local.

tacklebox

iTrader: (10)

Ok I checked home depot and they didn't have ****. I'll try the local hardware store, they always seem to have a better selection of stuff like this. Thanks.

blazerls1

iTrader: (23)

Go to Ace hardware,if you have one near.I got mine in stainless there..

radkon

iTrader: (2)

Worst case you can order them from McMasterCarr.

studderin

iTrader: (28)

I normal hex head bolt, like 13mm head. No washer, or anything.

Grind the heads down alittle they will work also in its all you can find. There is also a bolt call a Low head cap screw, thats works, but a butten head (BHCS) is more common.