Meziere Pump installed! Pics inside.........
08-16-2003, 03:06 PM
#1
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: Overland Park, KS, USA
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
Meziere Pump installed! Pics inside......... Uh.....yep it is blue... 
Piece of cake to install on my '99 w/LS6 intake and .015 milled heads. I wish I would have taken some pics before I reassembled everything, which I may do when I take the neck off to install the t-stat...wanted to run it and did not have a pipe wrench to get it off....just ran cooler. Kinda cool watching the coolant run through when I filled it....filled much quicker and no burping needed. She revs quicker and feels stronger!!!! Here is the pics.
http://community.webshots.com/album/85971315sZVElP
Piece of cake to install on my '99 w/LS6 intake and .015 milled heads. I wish I would have taken some pics before I reassembled everything, which I may do when I take the neck off to install the t-stat...wanted to run it and did not have a pipe wrench to get it off....just ran cooler. Kinda cool watching the coolant run through when I filled it....filled much quicker and no burping needed. She revs quicker and feels stronger!!!! Here is the pics.
http://community.webshots.com/album/85971315sZVElP
Trending Topics
08-17-2003, 01:06 PM
#10
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: Overland Park, KS, USA
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
Re: Meziere Pump installed! Pics inside......... Thanks for the good words!! YES, you can feel sotp hp/tq...and man does it rev quicker! Feels like I got another gear increase. My 11x17/315 Nitto setup held good on the street....well I am back to 
through 1st and 2nd. I am going to dyno this week...and post.
Later.
through 1st and 2nd. I am going to dyno this week...and post. Later.
08-19-2003, 12:12 AM
#16
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: Overland Park, KS, USA
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
Re: Meziere Pump installed! Pics inside......... Just turned 36K miles....I ain't savin' the fun part for the next guy.
Thanks again for the props!!!
Thanks again for the props!!!
08-19-2003, 01:37 AM
#18
TECH Fanatic
Join Date: Feb 2003
Location: Columbus, OH
Posts: 1,586
Likes: 0
Received 0 Likes
on
0 Posts
Re: Meziere Pump installed! Pics inside......... Just outta curiosity, how hard were the braided lines to install? I'm particularly wondering about how to install the connections to the radiator and water pump, etc etc etc if I can get around to it...
08-19-2003, 11:00 AM
#19
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: Overland Park, KS, USA
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
Re: Meziere Pump installed! Pics inside......... Good news pimpmaro!! The braided lines and connectors are fake. You can buy the kit for around $40 at AutoZone. I had to buy two to do what I ended up with. A lot of show car guys have been using this for years. The braiding simply slips over the hoses and the "connectors" are covers that slip over hose clamps. If you look close you can see what I am talking about.
Braided lines are not necessary.....except for the hard-core.
Braided lines are not necessary.....except for the hard-core.
