new dyno results! im happy!!!!!
10-01-2008, 12:48 AM
#1
12 Second Club
Thread Starter
Join Date: Nov 2005
Posts: 1,848
Likes: 0
Received 0 Likes
on
0 Posts
new dyno results! im happy!!!!! hey guys i just got back from the dyno and im very happy with the results!
last time i had it dynoed and tuned the end result was 313.3 hp and 333.8ft-lbs of tq.
since then i installed a set of coated pacesetters~tsp ory~p&p tb.
car started out rich they i made 3 pulls and the final numbers where 335.8 hp
and 353.5 ft-lbs of tq.
mods are the lt's~ory~p&p tb~ftra which dont really do any thing on the dyno~lid+k&n~custom 3in" single exit magnaflow exhaust.
i have the stock stall~3:23 rear gear~ and the car is a a4.
i dont have a ud pulley yet but im expecting about 2500-3k cash in febuary so at that time im going to go with a small cam~ud pulley~ls6 or fast 78 intake~and a small 3k stall and maybe some thing else if i have any cash left over.
the tuner was suprised on how much tq the car made and he said it's really strong for a a4.
car feels much stronger and it used to feel a little weak if i would go wot at about 50 in 2nd now it pulls really strong from around that speed.
last time i had it dynoed and tuned the end result was 313.3 hp and 333.8ft-lbs of tq.
since then i installed a set of coated pacesetters~tsp ory~p&p tb.
car started out rich they i made 3 pulls and the final numbers where 335.8 hp
and 353.5 ft-lbs of tq.
mods are the lt's~ory~p&p tb~ftra which dont really do any thing on the dyno~lid+k&n~custom 3in" single exit magnaflow exhaust.
i have the stock stall~3:23 rear gear~ and the car is a a4.
i dont have a ud pulley yet but im expecting about 2500-3k cash in febuary so at that time im going to go with a small cam~ud pulley~ls6 or fast 78 intake~and a small 3k stall and maybe some thing else if i have any cash left over.
the tuner was suprised on how much tq the car made and he said it's really strong for a a4.
car feels much stronger and it used to feel a little weak if i would go wot at about 50 in 2nd now it pulls really strong from around that speed.
Trending Topics
10-01-2008, 02:46 PM
#9
11 Second Club
iTrader: (8)
Join Date: Apr 2006
Location: Kansas
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a big improvement to me. I think headers are the cheapest hp/dollar mod for fbods.
Get a 3600 stall and 3.73s and that thing will really move out. Then cam it
Get a 3600 stall and 3.73s and that thing will really move out. Then cam it
10-01-2008, 08:25 PM
#10
TECH Apprentice
iTrader: (16)
Join Date: Mar 2007
Location: Colorado Springs, CO
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Was it the same dyno? Switching dynos could have an impact and the type of dyno too. I dont have experience with dynos, but I've heard that while the Dynojet gives bigger numbers, a mustang dyno is more accurate.
