broken pushrod?
10-29-2008, 12:22 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Denham Springs, LA
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
broken pushrod? some of yall read my previous post about a ticking sound that is there all the time now...
i pulled the driver valvecover and was inspecting the pushrods... all were good except one... it has a groove cut into it all around it and theres a dent or a deep scrape of some sort... what caused this?.. i tried to put up pics buit the digi cam is a pos...
i pulled the driver valvecover and was inspecting the pushrods... all were good except one... it has a groove cut into it all around it and theres a dent or a deep scrape of some sort... what caused this?.. i tried to put up pics buit the digi cam is a pos...
10-29-2008, 12:26 PM
#4
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Denham Springs, LA
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
its a ring groove cut in it right near the tip of the push rod and theres a marr.. like someone hit it with a hammer sort of.. hard to describe