Help with cam setup!
11-20-2008, 11:30 PM
#1
Teching In
Thread Starter
Join Date: Aug 2008
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Help with cam setup! 
im 16 and looking for my first cam on my z28 i plan on getting long tubes,ls6 intake,and a borla setup.my brother is running a g5x4 on a trans am with stock ls1 heads and hasnt had ptv clearance problems, i was looking at the t rex cam and wondering i would have ptv prblems?? i know its bigger but im beraly getting my knowledge up about all this stuff. Give me some pointers and tips on a good setup.
11-20-2008, 11:46 PM
#3
TECH Regular
iTrader: (9)
Join Date: Mar 2007
Location: Hellertown, PA
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
go with a 228r from texas speed i got the torquer v2 and like the top end but i think i may have over cammed it alittle with no injectors or intake on the car dont go big you'll regret it
11-21-2008, 01:35 AM
#4
Restricted User
Join Date: Jun 2003
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Your not going to want a Trex cam for your daily driver. Good cam but not for a stock daily driver. Look at something in the mid to upper 220's on the intake, no more than about 230. That with a good tune and you should have a fun street car.