holley505

iTrader: (1)

I want to see who is running TSP Torquer V.3

list your combos and your times.... PLEASE !!!

I am considering this cam for My carbed 418... I am currently using a 3000 stall but may move to a 3500...with my 3.36 gear and 3150 w/o driver...longtubes, victor jr intake, AFR heads, under drive pulley

Red96TA

iTrader: (14)

This thread was like three down from yours when you posted......

https://ls1tech.com/forums/generatio...ack-times.html

Red96TA

iTrader: (14)

I would consider a bigger cam for that car. It sounds like more of a track car due to the carb anyways. Just a thought.

1slow98Z28

iTrader: (3)

mine is the thunder racing TRAK which is similiar did 11.94 with LT, 90/90, 3.73, 4000 stall and that shifting at 5900 rpms.... upped it to 6300 for this spring and ill have the M9 in it and coil overs... maybe heads down the road

holley505

iTrader: (1)

Thanks...trying to make up my mine about the T V.3

holley505

iTrader: (1)

anybody else??

1slow98Z28

iTrader: (3)

buy the TRAK cam from thinder it is a good one.... raced a buddy with the MS3 and 3500 stall and i wwalked away every time and mine has a nice torq curve with it no peeks just flat basiclly and it s a stock 347

1slow98Z28

iTrader: (3)

http://www.youtube.com/watch?v=XfLRwdb0z_8

video of my car going on the dyno and a run on it.....

made 364 through a 4000 stall... the car made be4 that 310 with bolt on and no stall basiclly all i changed was the cam and went with a 4000 stall

holley505

iTrader: (1)

nobody else??

anything close

TSP comp cam 240/244 camshaft on a 112 LSA 608-612 lift with rpm range 2800-6800