WS.666

iTrader: (28)

...do I have enough? I'm I going to run into problems with this setup?

Torquer V.2 Cam - 232/234 .595/.598 112LSA
Patriot Stage 2.5 5.3L Heads (2.02/1.57 Valves)
GM Head Gaskets, Part # 12498544 (.060 Thickness)
7.400" Pushrods
Stock Rocker Arms
PRC Dual Valve Springs w/ Titanium Retainers
Stock LS1 Bottom End/Internals

on2

iTrader: (4)

Are the heads milled any?

WS.666

iTrader: (28)

Oh, sorry...yes, to 60cc

WS.666

iTrader: (28)

Anyone?

First Collision

iTrader: (13)

I think you'll be ok with a stock gasket.. best to check it though.

S10xGN

iTrader: (11)

I just checked that same cam on stock 241 heads and got 0.200"I and 0.190"E. Your heads would have to be milled a bunch to be outside the safe limits...

Russ