DCsLS1

Ok ive been reading alot on cams and how to's on installing them (ill be doing it soon) but ive noticed that its not a big practice in the LSx to change the lifters and im wondering why? or is it and i just missed that part? i thought that you needed to change the lifters when changing cams?

the_merv

iTrader: (88)

You have to pull the Heads to change the Lifters.

Make sure you pull your Rockers off and Push Rods out, and give the Cam a good couple of turns before you pull it out of the front of the Engine.

vettenuts

iTrader: (4)

Since they are roller lifters, you can usually get away without changing them although GM does recommend they be changed with a new cam. Not as critical as a flat tappet cam.

DCsLS1

cool thanks for the reply ill probably try and get away with it lol

01ssreda4

iTrader: (96)

i just plain didnt wanna pull the head but the first time i do they will be swapped.