Did I make the right choice ??
10-08-2003, 08:54 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: TN
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Did I make the right choice ?? Ordered this cam today, did I make the right decison ??
230/232 duration, .573"/.575", 111lsa
Want at least 400-410 RWHP and a NASTY
idle. Dont want to lose to much lowend tq. and dont want to spin it to 7000rpm
Please tell me this will do it
230/232 duration, .573"/.575", 111lsa
Want at least 400-410 RWHP and a NASTY
idle. Dont want to lose to much lowend tq. and dont want to spin it to 7000rpm Please tell me this will do it
10-10-2003, 05:55 PM
#6
Teching In
Join Date: Sep 2003
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Re: Did I make the right choice ?? W/ comp. tuning(EDIT), you should be alright as far as low end torque goes, but you wont notice the torque unless you get kinda on it. As far as the revs, 230/232 means that the crank will have to spin 230 degrees for the int. valve to open and 232 degrees for the exh. valve to open. So, your lookin at a little higher then 63-6400 RPM range. I think. Cool LSA though! 
BLAB BLAB BLAB BLAB BLAB VROOOOOOooooooooom.
BLAB BLAB BLAB BLAB BLAB VROOOOOOooooooooom. 
i hate mass and emissions
Trending Topics
10-14-2003, 03:07 PM
#9
TECH Veteran
Join Date: Aug 2002
Location: Hartsdale, NY
Posts: 4,055
Likes: 0
Received 0 Likes
on
0 Posts
Re: Did I make the right choice ?? Hey PDD:
My puny cam just failed NYS emissions!
Cam is 220/220, 564/564/ 112LSA
This with 11.4 ported heads, however...
They guy told me Westchester NY just changed their hydro carbon limit to 60PPM; my car measured 73PPM....
My puny cam just failed NYS emissions!
Cam is 220/220, 564/564/ 112LSA
This with 11.4 ported heads, however...
They guy told me Westchester NY just changed their hydro carbon limit to 60PPM; my car measured 73PPM....
