Rv_performance

just want to know my new setup iam gonna put Ms3 cam and 3600 Pii stall what will my quarter miles time will be and my horsepower /torque would be? any info would be great

1BAD_LS1

iTrader: (36)

need more info! intake, headers, ud pulley, ect.... ???????

Daryn

iTrader: (19)

11.9 with supporting mods.. throw a set of heads and you have 11.50

Blazingz28

iTrader: (5)

I'd think lower than 11.9..

Im LTs, 3.73's, tune, and I ran 12.7@110.. I'm hoping to be near 11's with stall.. no cam..

Rv_performance

my car is full bolt'ons has hooker headers and powerbond pulley,3.73 gears,shiftkit and detroit tru trac,tune by File . my car is 98' Ls1 trans am

UL LOSE

It would be better if you had a 4200+ stall with that cam.
A friend of mine had a MS3 cam-only car that went 11.45@117 but he had a TH350 w/a 4400 stall and 3.73s.

Rv_performance

it cuz i would have my car as a daily driver so dont wanted a big converter but wanted something big and be daily driver i think this setup would be fine right?

UL LOSE

It should be fine with a 3600 stall for driving around but I was saying if you want to get all you can out of it as far as track times you would want a little bigger stall. But yeah it should be fine for driving without bucking or surging much.

johnster

iTrader: (27)

{ul lose is rite} 4 best track times you need a 4k stall are higher, if your going with that ms3, if you wont to keep the 3600 drop down to a f14 cam or something like that, it will still run like a mo fo

RZRSEDGE

iTrader: (21)

Nice combo for spray though.

Rv_performance

where can i get that f14 cam or websites who makes those and what cam specs is

johnster

iTrader: (27)

futralmotorsport.com the f14 is 232/234 tps has great cams to

UL LOSE

Exactly.

Rv_performance

thanks man for the info

UL LOSE

No problem