Finally some dyno numbers!!!
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Finally some dyno numbers!!!
Here it is... Mods are TR 230/224 cam, Powerbond UD Pulley, Hedman LT Headers, and True Duals through Flowmaster 40's! I was impressed!
And here's the video link:
http://www.youtube.com/watch?v=a-qt6zgEUqM
The best run was 406 hp and 382 ft/lbs but this is the end result after tuning it for better drivability. Now it drives like stock with no trouble idling and no bucking/surging whatsoever. I couldn't be more pleased!
And here's the video link:
http://www.youtube.com/watch?v=a-qt6zgEUqM
The best run was 406 hp and 382 ft/lbs but this is the end result after tuning it for better drivability. Now it drives like stock with no trouble idling and no bucking/surging whatsoever. I couldn't be more pleased!
Trending Topics
#13
On The Tree
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Yep, those numbers are through a bone stock 10 bolt. And the torque on the low end is great... it broke the tires loose in 2nd gear at less than 2000 rpm so i need to get that sorted out, but it's still fun.