Dyno #s
#1
Teching In
Thread Starter
Join Date: Oct 2002
Location: everywhere
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Dyno #s
Should my car be making this power...386 to the wheels with the same torque....
I have a 595/595...230/230..on a 110..stage 2 Absolute speed heads,ported TB,LS6 intake,hooker longtubes,3800 stall,and 3.73s..air/fuel is at 13.1
I would think it should be making a little more
I have a 595/595...230/230..on a 110..stage 2 Absolute speed heads,ported TB,LS6 intake,hooker longtubes,3800 stall,and 3.73s..air/fuel is at 13.1
I would think it should be making a little more
#7
TECH Enthusiast
iTrader: (10)
Join Date: Aug 2002
Location: Arlington, TX Congestion City
Posts: 720
Likes: 0
Received 1 Like
on
1 Post
Re: Dyno #s
I'm curiuos as to where your rev limiter is set at. You should be pulling with that cam up to at least 7k i'd think. I have AS Stage II's with the TSP 228R cam. Mine is peaking at about 6700. I think the peak o that cam is gonna be higher. If you are only pulling it to say 6500 then your probably not seeing the peak HP out of it. JMHO
Trending Topics
#10
Re: Dyno #s
I just did a little investigating through your posts, found your name is Derrick Blackenburg, I Never sold you a set of my heads, If someone sold you a set saying they are mine please contact me so I can get to the Bottom of this, I have had a few other situations with people were told they are selling absolute speed heads and were not my heads, My heads have a high resale value and there are some people scamming people to sell there offbrand heads
#11
Re: Dyno #s
I just did a little investigating through your posts, found your name is Derrick Blackenburg, I Never sold you a set of my heads, If someone sold you a set saying they are mine please contact me so I can get to the Bottom of this, I have had a few other situations with people were told they are selling absolute speed heads and were not my heads, My heads have a high resale value and there are some people scamming people to sell there offbrand heads