AZPS03 cam
#1
Teching In
Thread Starter
Join Date: Jul 2005
Location: Surprise, AZ
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
AZPS03 cam
Any A4/LS1 guys have any experience in running this cam? I would like to run this cam with TEA/Trickflow CNC 215cc heads and a F.A.S.T. 90/90. The car has a STOCK 4L60e, and I'm wondering what stall I will need for it.
The cam specs are (from non-sponsor):
242/248 .621"/.615" @ .050"
I understand this is a monster cam for an automatic car, and I don't expect the car to be a dyno queen. This car will be primarily used for street/strip as opposed to a daily driver, as I highly doubt that the car will truly be street-able anymore.
The cam specs are (from non-sponsor):
242/248 .621"/.615" @ .050"
I understand this is a monster cam for an automatic car, and I don't expect the car to be a dyno queen. This car will be primarily used for street/strip as opposed to a daily driver, as I highly doubt that the car will truly be street-able anymore.
#2
TECH Senior Member
Very similar to a T-Rex but on different lobes. YPT4400 at least, or since you are in AZ maybe a PT4200.
Call Yank and be realistic with them, they will hook you up.
You better measure PTV to run his cam and set your valvetrain to a T. The clearances are tight.
Call Yank and be realistic with them, they will hook you up.
You better measure PTV to run his cam and set your valvetrain to a T. The clearances are tight.