GM Perfomance Parts sleeves???
11-04-2003, 12:42 AM
#1
Launching!
Thread Starter
Join Date: Jun 2003
Location: Kansas City
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
GM Perfomance Parts sleeves??? Part # 12480004. Cylinder sleeves (standard) "These sleeves are for new design aluminum V8 and V6 90 blocks. Technical Note: This sleeve has a 3.980" ID and can be bored to 4.125"."
Will these work on Gen 3 Design blocks?? Stock LS1 has a 3.98 bore size and the Racing Block (C5R) has a 4.117" bore. Could this work???
Will these work on Gen 3 Design blocks?? Stock LS1 has a 3.98 bore size and the Racing Block (C5R) has a 4.117" bore. Could this work???
11-04-2003, 01:59 AM
#2
TECH Addict
Join Date: Nov 2001
Location: St Louis, MO
Posts: 2,551
Likes: 0
Received 0 Likes
on
0 Posts
Stock LS1 has a 3.90 bore.
I doubt these are for the LS1. Even if they are, my understanding is that resleeving these blocks is more about technique, not the sleeve. I think you can buy dry (or wet) sleeves from Darton.
I doubt these are for the LS1. Even if they are, my understanding is that resleeving these blocks is more about technique, not the sleeve. I think you can buy dry (or wet) sleeves from Darton.
