400hp
06-05-2009, 04:13 PM
#1
Registered User
Thread Starter
Join Date: Jan 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
400hp I was wondering how much hp give or take i have with this set up
im thinking about 400hp..what you yall think??
MS3 cam from Texas Speed
Titianium Springs,lifters,rods
LS6 ported oil pump
SLP Dual timing chain
SLP long tube Headers
SLP loudmouth exhaust
LS6 intake manifold
85 BBK Throttle body
SLP 85MM mass air flow sensor
K&N cold air intake
Stage 3 trans from performabuild
3000 stall
373 gears
MSD 8.5 spark plug wires
NGK Platinum spark plugs
mail in order tune from TSP
im thinking about 400hp..what you yall think??
MS3 cam from Texas Speed
Titianium Springs,lifters,rods
LS6 ported oil pump
SLP Dual timing chain
SLP long tube Headers
SLP loudmouth exhaust
LS6 intake manifold
85 BBK Throttle body
SLP 85MM mass air flow sensor
K&N cold air intake
Stage 3 trans from performabuild
3000 stall
373 gears
MSD 8.5 spark plug wires
NGK Platinum spark plugs
mail in order tune from TSP
06-05-2009, 04:19 PM
#2
On The Tree
iTrader: (3)
Join Date: Jan 2009
Location: New York
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Personally I'd get a dyno tune... And then if you don't make at least 400rwhp, I'd be pretty disappointed. Also, I wouldn't go with the K&N intake, just never been a fan of them. Stick with an SLP or MTI lid, or upgrade to a FTP 85(+)mm lid.
06-05-2009, 04:26 PM
#4
11 Second Club
Join Date: Dec 2007
Location: Charleston, SC
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
i ditched my slp lt's and o/r Y, lm2 setup for my QTP and TD setup and picked up 18hp which put me over 400hp.
not sure if you have the cam yet but im not a big fan of the ms3, take a look at the 233/239 or the torquer 2-3.
not sure if you have the cam yet but im not a big fan of the ms3, take a look at the 233/239 or the torquer 2-3.
06-05-2009, 04:31 PM
#5
Registered User
Thread Starter
Join Date: Jan 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
i just put the cam in like 4 days ago lol..i wanna keep the cam i love it..but the exhaust i heard the TD and i like em but im kinda looking at the new SLP power flow exhaust i have a friend with em and i really the the sound..not sure about the hp gain or loss but thanks you the info
06-05-2009, 05:20 PM
#6
Launching!
well I'll probably be by you so I would like to know if you hit your goal. I'm looking into the MS3 but gotta send out my 3200 for a checkup broke transmission a while ago never put the converter back in so good luck keep me updated.
06-05-2009, 05:37 PM
#7
Registered User
Thread Starter
Join Date: Jan 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
thank you ill let you know..i set a dyno a week from now so ill keep you updated..but i just installed the ms3 and i love it..IMO i wouldnt have any other cam!!!
but i raced a 02 camaro ss with all bolt ons and a big stall and i beat him..he told me his was dynoed at 396 so im thinking around 400 for me!!
but i got a FAST 95/95 in mind if i dont break that 400 that will do the trick
but i raced a 02 camaro ss with all bolt ons and a big stall and i beat him..he told me his was dynoed at 396 so im thinking around 400 for me!!
but i got a FAST 95/95 in mind if i dont break that 400 that will do the trick
