Base pan....
07-06-2009, 07:44 PM
#1
12 Second Club
Thread Starter
Join Date: Aug 2005
Location: Paradise, Newfoundland
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Base pan.... can i remove the base pan without removing the engine in my car.
Something let go while dyno tuning and want to get a quick look to see the damage....it's going to be weeks before I can pull the engine.
Something let go while dyno tuning and want to get a quick look to see the damage....it's going to be weeks before I can pull the engine.
07-06-2009, 09:57 PM
#3
TECH Addict
iTrader: (8)
Join Date: Oct 2008
Location: toronto ontario canada
Posts: 2,047
Likes: 0
Received 2 Likes
on
2 Posts
you mean the oil pan ?
yes you can remove it with the engine still in car.
1 put a jack under the crank pulley
2 remove the 4 bolts on each motor mount connected to the k member
3 pump the jack slightly to lift the motor up
4 undo the 3 k member bolts on each side
5 let the k member hang down
6 remove all the oil pan bolts and the pan should come out no problem
let us know how it goes. good luck
yes you can remove it with the engine still in car.
1 put a jack under the crank pulley
2 remove the 4 bolts on each motor mount connected to the k member
3 pump the jack slightly to lift the motor up
4 undo the 3 k member bolts on each side
5 let the k member hang down
6 remove all the oil pan bolts and the pan should come out no problem
let us know how it goes. good luck