cam wear marks little rough
#1
TECH Fanatic
Thread Starter
iTrader: (70)
Join Date: Oct 2005
Location: Los Angeles, California (818)
Posts: 1,219
Likes: 0
Received 0 Likes
on
0 Posts
cam wear marks little rough
ok i have a g5x4 cam and its pretty rough on the lifter portions. can a machine shop buff this out or something like that to make it nice and smooth again?
#2
TECH Regular
iTrader: (24)
Join Date: Nov 2004
Location: Omaha
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
I doubt a shop can fix it without messing with the cam specs. Fixing it would require removing material and that would throw everything out of wack.
#6
TECH Fanatic
iTrader: (1)
If your cam lobes look like the first cam lobe...
Your in deep ****. The guy who did my head cam set up was highly regarded by a man who has been in the business for years. The guys is no more than an amateur. All my intake lobes are cracked, w/ deep wear marks after 5,800 miles only yes 5 thousand eight hundred only. The shop is out of Dallas Texas if any one wants to know where not to take their cars to shoot me a pm I'll tell you my night mare. Which consisted of a leaking front plate gasket, leaking heads, a tune that would have surely made my engine blow if a true professional would not have rectified it, and on and on and on... The best part the guy is not taking any responsibility for his shitty work.
Your in deep ****. The guy who did my head cam set up was highly regarded by a man who has been in the business for years. The guys is no more than an amateur. All my intake lobes are cracked, w/ deep wear marks after 5,800 miles only yes 5 thousand eight hundred only. The shop is out of Dallas Texas if any one wants to know where not to take their cars to shoot me a pm I'll tell you my night mare. Which consisted of a leaking front plate gasket, leaking heads, a tune that would have surely made my engine blow if a true professional would not have rectified it, and on and on and on... The best part the guy is not taking any responsibility for his shitty work.
Last edited by 02*C5; 07-29-2009 at 05:18 PM.