LS-3 cylinder walls...
11-29-2009, 11:44 AM
#1
LS-3 cylinder walls... Aside from a sonogram, what's the "general" wall thickness on these blocks?
Can they go out to 4.100" on a NA build?
If not, "about" how much $$$ to buy/install the Darton dry sleeves are the dry sleeves installable by the average machine shop?
Thanks!
Russ
Can they go out to 4.100" on a NA build?
If not, "about" how much $$$ to buy/install the Darton dry sleeves are the dry sleeves installable by the average machine shop?
Thanks!
Russ
