Can I hit 400rwhp without heads?
Trending Topics
#10
Originally Posted by JDPZ28
with my current setup, maybe plus an ASP pulley and cutout?
Mods in sig.
Mods in sig.
#12
LS1Tech Premium Sponsor
iTrader: (4)
Its definately doable, our last 231.237 cam car went over 410 with open cutout on stock heads
Jason
Jason
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#13
TECH Regular
iTrader: (3)
Join Date: Nov 2002
Location: albuquerque NM
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jason 98 TA
Its definately doable, our last 231.237 cam car went over 410 with open cutout on stock heads
Jason
Jason
TSP 228/228 stock heads, open cutouts 400 with a rich tune.
#14
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Not 400 but I hit 377 rwhp sae corrected and 399 uncorrected with a good tune with a tr224 on a 114 lsa. Not bad, a new fast tb and intake should get me a little more with another update on the tune.
#15
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Oct 2003
Location: Holly Springs, NC
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
I guess I'll have to wait until after the holidays to see where I am at now when I can get some money saved up for a dyno tune. How much can I expect from a pulley, 10-15 rwhp?
#16
TECH Fanatic
Join Date: Mar 2002
Location: Your Reality Check Bounced...
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
pre 241 heads won't hit 400 unless u go with big cam and small n20....241 heads will make 400 with correct set up and tuning.....
I had GTP heads (MTI kinda looked and retouched them) then I put a 230/227 cam in there with my A4 and I made well over 400 hp.
I think 390-400 would be easy with a G5x cam and tuning on 241 heads
I had GTP heads (MTI kinda looked and retouched them) then I put a 230/227 cam in there with my A4 and I made well over 400 hp.
I think 390-400 would be easy with a G5x cam and tuning on 241 heads