ARP head bolts need TQ specs
#1
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: May 2009
Location: Iceland
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
ARP head bolts need TQ specs
hi
what are the Tq specs on the ARP head bolts on LS2 block
both the bigger one and also the small one.
please help me here out.
and where can i find out good instructions on how to bolt the heads on.
thanks
Baezi
what are the Tq specs on the ARP head bolts on LS2 block
both the bigger one and also the small one.
please help me here out.
and where can i find out good instructions on how to bolt the heads on.
thanks
Baezi
#3
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
What had gaskets? And I would cycle them 3 times before final torque. 35/65/85ft. lbs with 11mm bolts and 10/20/30ft. lbs with 8mm bolts with SAE30 oil (chamfer side of washer faces up towards the head of bolt also)
Last edited by JPH; 01-11-2010 at 05:32 PM.