Am I missing anything (cam install parts)?
02-09-2010, 11:42 AM
#1
Am I missing anything (cam install parts)? I was going to order a Torquer V3 cam package from Texas speed in a bit and just wanted to make sure I wasn't going to have to order anything else from them and have to wait on something and have the car down.
I was going to pick up a new LS2 chain and get the usual gasket package to change out everything up front. Is there anything else that will need to be changed or I should consider buying outside the cam kit?
I was going to pick up a new LS2 chain and get the usual gasket package to change out everything up front. Is there anything else that will need to be changed or I should consider buying outside the cam kit?
02-09-2010, 11:44 AM
#2
11 Second Club
iTrader: (4)
Join Date: Dec 2007
Location: TX
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Make sure you get dual springs, hardened pushrods, gaskets, LS2 chain, and I would get a Powerbond UD pulley as well while I was in there
Been there....done that...but with the Tsunami cam
Been there....done that...but with the Tsunami cam
