Michael2192

I'll try to make this short & please accept my apology if this post is on the wrong area.

I had a '98 Trans Am that the motor blew. I found & bought the engine out of a 2002 Camaro, it was a "fire job". While my TA was down I sent the heads to the performance shop to do a little tweaking. Needless to say I used the heads off the TA. I now have the heads off the Camaro. I planned on doing some work to these heads but never did, I have them down to the bare head & have sent them to the machine shop to be clean & checked, all ok. My queston is does anyone know the value of these heads? I am going to sell them because I no longer have a use for them.

Thanks.
Michael.

kinglt-1

iTrader: (26)

they are 241 casting prolly worth 2-300 dollars.

01ssreda4

iTrader: (96)

If they are 241s, I would say they are worth $100-$150 shipped. However if they have a clean bill of health from a machine shop and did you possible have them milled to true them up?? I could see them going for $175 cleaned up (flat) and with a valve job maybe $200 to $225 shipped. I have seen stockers go for $100. And my mill/valve job was $150 at a local machine shop. Thats how I say they arent worth anymore then about $200 to $250 max.

Bad Notch

iTrader: (3)

150 to 200 shipped sounds right

02*C5

iTrader: (1)

200 at most shipped, the 241s are not great performers per say and mostly people who are doing a true budget build get them.

BriancWS6

iTrader: (18)

They're worth whatever someone wants to pay for them. I sold mine in a local paper for $275

Michael2192

Thank you to everyone who replied.

Paint_It_Black

iTrader: (1)

try locally. I buy them for port jobs. I pay 80-100 per set. I can get them anytime I want at that price.