Kris Mangrum

I come from mustangs. I know the lingo and know some pretty reliable 302 351 combos. But I know very little about the 350 engines. As far as what works with what and whats best for a budget. I will be getting a wrecked 2002 corvette sat the 10th. The motor is stock and only has 33k on it. I understand that they come with 350fwhp.

My goal is at least 400 rwhp and the more the better. I am on a pretty tight budget because I'm building a FFR GTM kit car and need to save the money for it. The car comes with special made exhaust so I can't change that.

I have put this together just from reading a few days. What kind of power would it yield me. Thanks in advance. Kris

2002 ls1, with used ls6 heads, mail order tune, and what ever cam you guys say I should use.

xxBlackTAxx

iTrader: (1)

If you're going to get stock unported ls6 heads then i would keep the cam in the low 230s. I have a 99 trans am and i am going to be getting a tsp228r cam to use with my stock heads but when i get ls6 heads i will probably go with something around 232. goodluck with the car man

garygnu

check out the dyno section .some good threads on ls6s and EPS cams.

Kris Mangrum

You have contact info for EPS?

Josh18Fan

iTrader: (2)

http://www.engpwrsys.com/
They've made some pretty insane power with stock ls6 heads and their custom cam lobes.

garygnu

Engine Power System ,225-751-8500,or PAT-G.they are a vendor listed on the right.

'02 WS6

iTrader: (73)

X2 on Geoff @ EPS and Pat G. ]at G spec'd my cam, and Geoff took care of the rest.