nazztman4739

iTrader: (6)

I just bought a billet double roller timing set what needs to be done to install this ?

KCS

iTrader: (20)

Spacers behind the oil pump, and then clearance the front cover.

nazztman4739

iTrader: (6)

nothing on the crank? des anyone make an aftermarket cover and spacers for this chain for an easier install

Jon@HKE

Nothing has to be done to the crank, and the spacers should be in the box with the timing set.

KCS

iTrader: (20)

No, the crank should be fine. The double roller timing sets usually come with the spacers, oil pump gear, and hardware, along with the gears and chain.

I don't know of any aftermarket covers clearanced for a double roller. The only aftermarket covers I can think of are QTP's 2pc, and the distributor front cover, which certainly isn't any easier for a double roller.

nazztman4739

iTrader: (6)

awsome ill find out thursday for sure ifthey are in there