Bad Notch

iTrader: (3)

What is the part number for the ARP Pro Series Rod bolts that fit in stock LS1 Rods ? Thanks.

Duffster

iTrader: (103)

http://www.arp-bolts.com/

Beau@SDPC

iTrader: (14)

234-6301. I have plenty ready to go

Bad Notch

iTrader: (3)

I called them and they recomended the ARP 234-6301 Waveloc 2000 bolts, which I bought and they don't fit all the way through the cap due to either the shoulder on the bolt or the little sleeve thats on the cap side. So I was wondering if that was the bolt that everyone else is using.

Beau@SDPC

iTrader: (14)

There is no "wavelock" to them in the LS bolts. You have to take that "sleeve" out. That is the reason for the shoulder on the bolt, to register the cap correctly.

Bad Notch

iTrader: (3)

Oh ok. What the best way to get the sleeve out ?

Beau@SDPC

iTrader: (14)

I can think of a few creative ways, but probably a pick would be easy.

Bad Notch

iTrader: (3)

yeah, that sleeve is really in there. I think I'm going to have to break out my '' precision " tools for this one, I.E. Big Vice, A Big Drift, and the biggest BFH in the drawer. Slightly Joking of course.