BAD2000Z28

What is the biggest, best, highest power cam that will fit with ported stock heads that are milled .030. With 2.02 & 1.60 valves. Which are better, standard splits or reverse splits? I am getting some TEA or PP heads 5.7 not 5.3. Who else has these heads and how much power and what will I run at the dragstrip?

jrp

iTrader: (16)

dont go higher then 226-228 without claying it first and checking clearance. with the heads milled .030 i'd stick with a 224 cam to be safe. well need more info on your whole setup and goals to give you a better decisions.

2001CamaroGuy

iTrader: (6)

you can fit larger than a TR224 with your setup....

I have 5.7 heads milled 0.030" with 2.08/1.60 valves and with my TR224 I have in excess of 0.110" P-to-V clearance