1998flamedCamaro

iTrader: (4)

My Car:

1999 trans am A4 w/3.23's 112k miles, BONE STOCK

First let me break down what I am looking for:

Looking for 380-400rwhp. Low 12's or better.

How I will be using the car:

Daily driver, I want something I can ride around in all day with the A/C on and not have to worry about the streetability of the cam.

Mods besides the cam I will be performing:

LT's
ORY
ls6 intake
ported tb
lid
free mods

I have been reading up and I think I have picked a cam that would be good for me.
Futral F13 230"/232" .595"/.585" 114LSA

Just trying to get some other voices with either a yay or nay on this cam for what I am looking to do with the car.

DSkyles

iTrader: (1)

https://ls1tech.com/forums/dynamomet...k-results.html

You will need a converter no matter what.

VaderZ

iTrader: (3)

That cam looks good.

garygnu

a good stall and better suspension parts with a eps cam will get in the 11xx.

JPH

iTrader: (2)

A 228/228 114 cam with a cutout will get you 385+hp and 12.30s or better and be friendly as heck to drive daily with no issues and use beehive springs and stock pushrods to get it done. But you will want to add 3:73 gears and a 2800-3200 stall to complete the combo.

LS12Fast4U

iTrader: (1)

Get the TR224 cam. Check out my sig for HP and power adders.

98z8uup

iTrader: (7)

Get a good stall 1st. There are so many cams that will get you what you want. Any cam from a 224 to 230 will get you the goals you are looking for with a good tune.

1998flamedCamaro

iTrader: (4)

Already have a ls6 oil pump ordered
Do I just need the ls2 chain, or do I need the gears also?
What kind of valve springs would you recomened?

garygnu

get a good stall to match the cam.you can get some drop in springs from TSP,comp 918s or pac 1218.get a spring compressor from the ws6 store.

1998flamedCamaro

iTrader: (4)

Garygnu, thanks for all your help. I am looking at a 3000-3200 stall, what brand would you recomened? I see you are running a 3000 stall, how is it treating you and what brand is it? What kind of springs are you running?

Would this work for compressing the springs?
https://ls1tech.com/forums/tools-fab...available.html

JPH

iTrader: (2)

Yank SS3200 stall
PAC #1218s
Crane Tool

Is all that I would use.