Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Looking to make 400+ rwhp

Thread Tools
 
Search this Thread
 
Old 11-14-2010, 04:23 AM
  #1  
Staging Lane
Thread Starter
 
time3777's Avatar
 
Join Date: Nov 2010
Location: Seymour,Indiana
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Default Looking to make 400+ rwhp

I have a 2005 gto a4 I've added Kooks 1 7/8 headers and a k@n cai. I'm ready to install a new cam and springs. What cam is recommended to help me acheieve this goal?
Old 11-14-2010, 04:32 AM
  #2  
TECH Veteran
iTrader: (14)
 
redbird555's Avatar
 
Join Date: Mar 2009
Location: Pompano Beach FL
Posts: 4,444
Likes: 0
Received 8 Likes on 8 Posts

Default

when picking a cam we need to know a little more than that like what kind of driveability and usage ud like to get out of the car what kind of future mods your going to do etc. And first off it would really be in your best interest to do a stall converter first they really are a must with a cam in an a4 car without one yu will not get the full benefits from the cam and the car will not drive very good either. All of the above affects cam choice but in short a small-med size cam in an ls2 will easily make 400 rwhp. Btw your 05 gto uses the ls2 engtine so next time you post the gen IV section is the right place.
Old 11-14-2010, 09:05 AM
  #3  
TECH Senior Member
 
garygnu's Avatar
 
Join Date: Feb 2009
Posts: 5,446
Received 4 Likes on 4 Posts

Default

the 222/226 EPS cam will do it.you can get springs and harden push rods from TSP.




All times are GMT -5. The time now is 08:25 AM.