coolant in intake????
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Dec 2009
Location: Uniontown, PA
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
coolant in intake????
i been losing coolant. had the system pressurized no leaks at all. so i started to tear it apart and there was coolant in the intake behind the throttle body. i thought maybe bad intake gaskets. but after i took the intake off all the "orings" for the intake looked fine. i just want some second opinions before i go a tear all the way to the heads. thanks
#4
maybe a cracked head and coolant is be inhaled by the pcv system.was it alot of coolant or small puddle?look at your plugs and do a compression check also.you mite have some moister condensation and its getting in the intake.
#6
TECH Senior Member
iTrader: (8)
#7
On The Tree
Thread Starter
iTrader: (3)
Join Date: Dec 2009
Location: Uniontown, PA
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
i have the bypass mod done all ready. i figured that it was just moister in the intake but i have a bad head gasket. thats the only place i can think that the coolant is going. is not onthe floor