HELP!!!!!!!!!!!!! i bent a valve and dont know what brand it is PLEASE HELP
#1
11 Second Club
Thread Starter
iTrader: (11)
Join Date: Aug 2005
Location: plano
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
HELP!!!!!!!!!!!!! i bent a valve and dont know what brand it is PLEASE HELP
ok so i know its stock size.. but it looks NOTHING like the stock valve..
now the stock one is on the left ... mine in the right...WTF? any ideas or is it a stock valve with a like maybe 3 angle valve job and thats a "back cut" or something? please help
now the stock one is on the left ... mine in the right...WTF? any ideas or is it a stock valve with a like maybe 3 angle valve job and thats a "back cut" or something? please help
#4
11 Second Club
Thread Starter
iTrader: (11)
Join Date: Aug 2005
Location: plano
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
its a 317 head.. ported ... i got these heads 2nd hand from a guy that had them done i belive in oklahoma but i dont remember his screen name on here so i have no way to figure this out.. and i dont wanna have to get a whole new set of intake valves
Trending Topics
#13
11 Second Club
Thread Starter
iTrader: (11)
Join Date: Aug 2005
Location: plano
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
i understand that i thought so too.. but if u look at the first pics the valve is obviously different.... but i dont know if the stock was cut that way or what..... i just need to have the machine shop figure it out....