Mike Morris

iTrader: (55)

Curious on the idle if you have a sound clip. Will be a few weeks before I can install it and start smashing up bolt on 5.0s.

thunderstruck507

iTrader: (18)

I think there has been one similar in the dyno forum.


No worries about the 5.0, by the time you get this installed most of them will have destroyed the Getfragged 6 speeds.

Mike Morris

iTrader: (55)

Yes I think I saw that thread.


Yes that horrible what the owners of those cars have to deal with

hiltsy855

iTrader: (35)

https://ls1tech.com/forums/14094501-post19.html

https://ls1tech.com/forums/multimedi...dle-video.html

https://ls1tech.com/forums/dynamomet...is-tuning.html

Mike Morris

iTrader: (55)

Thank you

*02WS6TURK*

iTrader: (13)

I am running pretty much that identical cam. I picked up roughly 52rwh (Mustang dyno) with it on a 114lsa. 400rwh w/ bolt-ons w/ 4.10's. Strong through-out the entire RPM range. Just recently put on a Fast 92/92 and picked up another 14rwh and 15rwt.

theevette

iTrader: (2)

I bought similar give me 30 days and I'll let you know

garygnu

with the right exhaust system it will sound pretty mild ,but mash the gas and hope to hook up.should I do a mail order tune with Geoff or have a local tuner do it?

Mike Morris

iTrader: (55)

Local tuner though I am not sure if the car will be driveable with that cam untuned.

Vette post what you get

BAD2000TA

iTrader: (6)

I have that exact cam in my 383 LS6. Nice idle, pulls hard!! I'll try and get you a sound clip today!!

BAD2000TA

iTrader: (6)

Here's the video clip with my 383 Trans Am and 226/234 EPS cam. And, yes, I know, the exhaust sucks! Present from the wife - what can you do!

IRONFIST

I bought the exact same cam about 3 weeks ago. It should be here in a couple more... fingers crossed.
Great cams, worth the wait...
But there is a wait...

Mike Morris

iTrader: (55)

Thanks Bad-sounds good!

shane2390

iTrader: (2)

http://www.youtube.com/watch?v=kSxxXDo9gs0

thats with possible broken springs too, lol torn apart again, didnt install the seats and learned my lesson hah.

wickedbluess

iTrader: (20)

Just installed the same cam with 4degrees advance. Sounds really good.

01ssreda4

iTrader: (96)

Sounds like some of EPS's "custom" cams are real similar or identical. Almost.......dare I say it, like "shelf cams"??????

itsslow98

iTrader: (18)

^^ Your point?

I know I could careless. And BTW he keeps no cams in stock they are all gorund per order by comp so.............he has no SHELVES to put them on.

01ssreda4

iTrader: (96)

Ha ha you think because its called a "shelf cam" that it actually has ever sat on a shelf? Man thats frickin funny right there....You obviously don't get it, so stop trying

*02WS6TURK*

iTrader: (13)

Eps ftw!

itsslow98

iTrader: (18)

It's called sarcasm thansk for getting it.

I just see absolutely no useful info in your post so why even post it? If you dont like EPS cams, dont come in threads about EPS, makes perfect sense to me.