Double Aught

iTrader: (5)

After months of researching threads, I have decided on my set up. I have an 01 'Hawk 6spd\3.42 . Will stick with stock cubes. Going with the torquer 3 and the fully CNC'd Advanced Induction 241 head. (I'm sending in my heads), LS6 intake, appropriate pushrods and lifters, headers, ported oil pump, plugs, wires, motor mounts, water pump, catted y and the tune. I wanted to use the FAST 90/92, but has anyone noticed the asking prices on fleabay? Nearly a grand by the time it gets to me. I'll pass. Would like to have the intake ported for a larger TB though. I am not getting caught up in a numbers game, but what would be an approximate hp/tq with this set up? I am hoping for at least 400hp at the flywheel.

BrntWS6

iTrader: (7)

I passed on the FAST setup too, too much money for the gains IMO. I have the same cam but with 2.5 ls6 heads. Getting dyno tuned next Thursday. That setup should easily put you at 400rwhp if not more.

Double Aught

iTrader: (5)

cool. are you planning on posting your dyno results? it would be a nice comparison.

BlueBird346

iTrader: (13)

400 at the flywheel is very humble for that setup IMO. You should see at least that at the wheels.

BrntWS6

iTrader: (7)

I will post results. This is being done on the same dyno I used last time, so it should show good results from what I had before.

99screamindemon

i would say 400 at the fly would be pretty low for that! im putting in torquer v3 and stg 2.5 ls6 heads as we speak, cant wait to get it together...