Valve lash
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: May 2011
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Valve lash
I replaced some bent/broken pushrods on my ls1 camaro and torqued the rocker arms to 22 lb/ft. The cam is stock as well as all of the valve train. I followed the information from ls1howto http://www.ls1howto.com/index.php?article=23
The car runs fine im just concerned about too tight or loose, please weigh in, also stock heads.
The car runs fine im just concerned about too tight or loose, please weigh in, also stock heads.