Help with chatter noise
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: May 2012
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Help with chatter noise
So I have a rx7 with a built ls1 with...
- Stock Crank
- Scat Forged Rods
- Probe Forged Flat Top Pistons
- Coated Bearings
- Ported & Polished 241 Heads by SLP
- PRC Gold Spring Kit W/ Titanium Retainers, Seats & Seals
- TSP Chromemoly 7.40” Pushrods
- TSP Custom Grind Camshaft 232/234, 595” / 598” , 114 LSA
- LS6 Intake
- Stock Throttle body and MAF
- MSD Plug Wires
- Oil Catch Can
- Stainless Fuel lines from engine to connectors under car
- Z06 Return Fuel Rail W/Vac FPR
#2
10 Second Club
What do you mean clutter noise? does it only do it on cold start? Both my LS1s have a slapping noise on cold start but goes away within a few seconds and with a cam you get the sewing machine noise.