Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Rebilding my 6.0

Old 12-13-2012, 09:06 PM
  #1  
Teching In
Thread Starter
 
jetboat's Avatar
 
Join Date: Dec 2012
Location: Russian River CA
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default Rebilding my 6.0

I have A 2004 Boice Jet boat 22' Kodiak Marine LQ4 or 9,Hamilton 212 Jet That at 235 Hours Ate #8 & #7 Pistons and rods with no Warning. So we get to do A rebuild I am Putting A Scat forge 408 stoker with H rods, 10.2 comp. The rest will be stock for now.Do I need A retune or stock tune be ok. I would like to her if there is more I should do in the bottom now?
Old 12-13-2012, 09:08 PM
  #2  
TECH Senior Member
iTrader: (9)
 
Tainted's Avatar
 
Join Date: Mar 2006
Location: Indianapolis
Posts: 8,425
Likes: 0
Received 2 Likes on 2 Posts
Default

Def gonna want a new tune
Old 12-14-2012, 09:00 AM
  #3  
TECH Junkie
iTrader: (5)
 
redtan's Avatar
 
Join Date: May 2008
Location: Belmont, MA
Posts: 3,764
Likes: 0
Received 15 Likes on 14 Posts

Default

Oh yeah, going from 364 cubes and low compression to 408 and higher compression is definitely going to need a tune. Especially since you're most likely going to need bigger injectors.


Thread Tools
Search this Thread
Quick Reply: Rebilding my 6.0



All times are GMT -5. The time now is 05:03 AM.