Needed Parts!
#1
Registered User
Thread Starter
Join Date: Mar 2013
Location: Chicago, IL
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Needed Parts!
I have an 01 Z28 5.7L V8 350 small block. I need a stall converter and a 3.73 gear that's compatible for my car. I have an automatic if that helps. I have seen 3.73's online and all of them are a different size with the inches. my buddy said that there was a tag on the differential explaining my entire rear end but its not there. if someone can post a picture of their differential and the tag so I can get the right size for the 3.73 would be awesome. Thanks.
#2
TECH Apprentice
iTrader: (16)
7.5"/7.625" 10 bolt are the gears you need, for a 3 series carrier. Anything on this page for example: http://www.ws6project.com/user_stor/...g-pinion-sets/
Torque converter you need one for a 4L60E w/ lockup. Take your pick: http://www.ws6project.com/user_stor/...ue-converters/
Torque converter you need one for a 4L60E w/ lockup. Take your pick: http://www.ws6project.com/user_stor/...ue-converters/