Gotsom02

Hi I was just wanting some input on some good cams for the set up.
My current set up is stock 241 heads,ls6 intake, .580/.580 lift 224/224 duration 114 lsa, full exhaust,3.73 gears, 3000 stall.
Looking to make more mid/top power
I have 243 heads(thinking about porting) and a fast 92 intake sitting in the basement, what cam would go good with that setup I was told by a few to go with a torquer v3. any input

99Bluz28

iTrader: (35)

I'd recommend going with 3600-4k stall for starters.
Do you have a preferred cam grinder(Comp Cams, Cam Motion, Lunati, etc..) ?

Gotsom02

not really, just keeping an open mind