Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

HELP! good oil pressure but NO oil getting to the rockers????

Old 10-12-2013, 10:40 AM
  #1  
Staging Lane
Thread Starter
iTrader: (2)
 
Rocker665's Avatar
 
Join Date: Aug 2010
Location: uxbridge MA
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
Default HELP! good oil pressure but NO oil getting to the rockers????

alright guys i know im in the gen 3 interal section but i Drive a 1993 with a LT1 didnt know where else to post for this problem, figured it would be the same across the board for the motors, so here is the story my lifters started making some pretty bad noises, so i replaced them with some new AC delcos, Everything was done very carefully and right, one of the lifters was scorn on the roller but the cam lobe looked good, ok well the car is still making this screeching noise on the ride home, same noise it was, i pulled the valve covers this morning ans started it, there isnt a drop of oil getting to the rockers, any of them, im baffled because i have my mechaical oil pressure gauge on the top of the block behind the intake and it reads good pressure across the board. any help would be greatly appreciated!
Old 10-12-2013, 07:40 PM
  #2  
TECH Apprentice
iTrader: (1)
 
TT427's Avatar
 
Join Date: Dec 2009
Location: Florida
Posts: 372
Received 6 Likes on 5 Posts

Default

Did wash the packaging grease out of the lifters before installing them?


Thread Tools
Search this Thread
Quick Reply: HELP! good oil pressure but NO oil getting to the rockers????



All times are GMT -5. The time now is 04:08 AM.