HP difference G5X2 vs. 224 w/TEA heads?
06-07-2004, 12:36 PM
#1
STF Veteran
Thread Starter
Join Date: Jul 2002
Location: Beamville, VA
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
HP difference G5X2 vs. 224 w/TEA heads? I've been sitting on some TEA's 1.5x heads with dual springs milled .010 that flowed over 300cfm @ 600. I'm just now getting the time for my install H/C/pulley/FLP's/TB/, and I have the CC224 112 563. All this talk about the G5X2 and G5X3 have me thinking I need a little more than what the 224 can provide. Can I use the X2 with these heads, what kind of number differences are there between the two cams, and would there be any adverse effects to doing it? Thanks.
06-07-2004, 12:48 PM
#2
TECH Resident
iTrader: (2)
Join Date: May 2003
Location: Tempe, AZ
Posts: 840
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TA TED
I've been sitting on some TEA's 1.5x heads with dual springs milled .010 that flowed over 300cfm @ 600. I'm just now getting the time for my install H/C/pulley/FLP's/TB/, and I have the CC224 112 563. All this talk about the G5X2 and G5X3 have me thinking I need a little more than what the 224 can provide. Can I use the X2 with these heads, what kind of number differences are there between the two cams, and would there be any adverse effects to doing it? Thanks.
