AFR heads/G5X-3 the dyno is fixed
06-08-2004, 09:08 PM
#1
FormerVendor
Thread Starter
Join Date: Nov 2001
Location: Dallas/Wylie Texas
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
AFR heads/G5X-3 the dyno is fixed The dyno is fixed and the head swap was complete. The car has a stock Z06 engine in a corvette C5. The car had Stock Z06 heads with a thin cometic head gasket and a G5X-3 cam and an oval throttle body (tpis) grafted to the stock LS6 intake manifold.
Nothing changed from the before and after except putting the AFR 205 cylinder heads on. here is the graph.
445rwhp 423rwtq before ..........485rwhp 448rwtq after
Thanks
Lou Gigliotti LGM
Nothing changed from the before and after except putting the AFR 205 cylinder heads on. here is the graph.
445rwhp 423rwtq before ..........485rwhp 448rwtq after
Thanks
Lou Gigliotti LGM
06-08-2004, 09:10 PM
#2
TECH Regular
Join Date: Jan 2004
Location: Somewhere in Cajun Country
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LG Motorsports
The dyno is fixed and the head swap was complete. The car has a stock Z06 engine in a corvette C5. The car had Stock Z06 heads with a thin cometic head gasket and a G5X-3 cam and an oval throttle body (tpis) grafted to the stock LS6 intake manifold.
Nothing changed from the before and after except putting the AFR 205 cylinder heads on. here is the graph.
445rwhp 423rwtq before ..........485rwhp 448rwtq after
Thanks
Lou Gigliotti LGM
Nothing changed from the before and after except putting the AFR 205 cylinder heads on. here is the graph.
445rwhp 423rwtq before ..........485rwhp 448rwtq after
Thanks
Lou Gigliotti LGM
06-08-2004, 09:18 PM
#4
11 Second Club
40 hp ... thats a kick in the pants 
have you driven it around with them??? how does it feel?
is there any more hp in tuneing?
i cant wait for results to start flooding in
have you driven it around with them??? how does it feel?
is there any more hp in tuneing?
i cant wait for results to start flooding in
06-08-2004, 09:19 PM
#5
FormerVendor
Thread Starter
Join Date: Nov 2001
Location: Dallas/Wylie Texas
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Here is exactly what the car had in it.
Full belts, G5X-3 cam and LG Pro Long Tube headers,oval tpis/ls6 intake Mcleod dual disc clutch,11.24:1 compression, 93 octane gas, underdirve pulley, blackwing airfilter, Borla stinger mufflers, stock 342 gears. 6 speed trans.
LG
Full belts, G5X-3 cam and LG Pro Long Tube headers,oval tpis/ls6 intake Mcleod dual disc clutch,11.24:1 compression, 93 octane gas, underdirve pulley, blackwing airfilter, Borla stinger mufflers, stock 342 gears. 6 speed trans.
LG
Last edited by LG Motorsports; 06-08-2004 at 09:35 PM.
Trending Topics
06-08-2004, 09:43 PM
#12
TECH Apprentice
Join Date: Jan 2002
Location: Texas
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GrannySShifting
thast healthy numbers, bt didnt Tony make 470 with a 224/228 cam with a factory LS6 intake w/o the TB etc?
Not saying its bad by any means, just thougt there woudl be more of a difference. Grat torque up high
Not saying its bad by any means, just thougt there woudl be more of a difference. Grat torque up high
Either way, great numbers and a back to back head swap dyno to quiet the naysayers.
Todd
06-08-2004, 10:53 PM
#14
TECH Fanatic
iTrader: (20)
Join Date: May 2004
Location: Gilbert, AZ
Posts: 1,365
Likes: 0
Received 0 Likes
on
0 Posts
Me wants a set for my car!! I wouldn't mind 450+ rwhp with some AFR's!! The HP never stops, just starts to flatten out at 7000rpm, incredible Lou!!! Wish I had some money right now 
I wouldn't mind 450+ rwhp with some AFR's!! The HP never stops, just starts to flatten out at 7000rpm, incredible Lou!!! Wish I had some money right now
06-08-2004, 10:57 PM
#15
TECH Junkie
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
Forget the AFR's, 445rwhp 423rwtq on stock ls6 heads with a G5X-3, full belts through mufflers? 
I must say a 40rwhp gain over ls6 heads equates to a 50rwhp or so gain over ls1 heads. Very nice, very nice.
I must say a 40rwhp gain over ls6 heads equates to a 50rwhp or so gain over ls1 heads. Very nice, very nice.
Last edited by verbs; 06-08-2004 at 11:02 PM.
06-08-2004, 10:59 PM
#17
TECH Fanatic
iTrader: (20)
Join Date: May 2004
Location: Gilbert, AZ
Posts: 1,365
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I saw that ****, that Z06 is rocking with the stock heads, but look what cam he has now Doesn't shock me that much, considering I have 70 RWHP more with the X3 than my car made with the stock cam. I need more power!!!!!!!!!!!!!!!! 
Doesn't shock me that much, considering I have 70 RWHP more with the X3 than my car made with the stock cam. I need more power!!!!!!!!!!!!!!!!
06-08-2004, 11:00 PM
#18
FormerVendor
iTrader: (1)
Join Date: Feb 2002
Location: Waldorf, MD
Posts: 3,059
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by verbs
Forget the AFR's, 445rwhp 423rwtq on stock ls6 heads?
Who cares even if they were a ported set of castings the AFR's still made 40 more HP and 23 more ft/lbs of torque
06-08-2004, 11:03 PM
#20
FormerVendor
Thread Starter
Join Date: Nov 2001
Location: Dallas/Wylie Texas
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
We get 430+ rwhp with our G5X-3 cam only with headers and bolt ons from a Z06.
this car had the intake on it also, and a light flywheel with Mcleod dual disc.
Tony at AFR had a Fast 78mm intake manifold on his car with the 470rwhp that he got. (he got 468 on my dyno, you know the one that reads high)
But at any rate, the heads were the only part changed so the 40 rwhp is legit.
Thanks
Lou G
this car had the intake on it also, and a light flywheel with Mcleod dual disc.
Tony at AFR had a Fast 78mm intake manifold on his car with the 470rwhp that he got. (he got 468 on my dyno, you know the one that reads high)
But at any rate, the heads were the only part changed so the 40 rwhp is legit.
Thanks
Lou G