4.8poweredsierra

Well long story short I bought a newer 6.0 that would've worked in my truck but it was bad and I got stuck with this one. Does anyone know what all it will bolt up too sitting like it is? I know a 4l80e will work but I'm going to put this motor in an older truck and put a carburetor on it. If anyone can help od appreciate the info

JoeNova

It will still bolt up to basically anything. The difference being the .4" thick spacer that is normally between the flexplate and crank won't be there.

nobreaks254

iTrader: (50)

should work fine for any PG, 700r4, TH 350/400, etc. Like Joe said, you wont need the spacer that is normally required

4.8poweredsierra

Okay I heard it would work with a 700r4 but I was wanting to put a 400 turbo or a 350 behind it but wasn't sure if it would work